| sys |
| sysname MSR3600 |
| # |
| telnet server enable |
| # |
| password-recovery enable |
| # |
| vlan 1 |
| # |
| vlan 100 |
| description shengchan |
| # |
| traffic classifier af-1 operator and |
| if-match acl 3001 |
| # |
| traffic classifier af-2 operator and |
| if-match acl 3002 |
| # |
| traffic behavior af-1 |
| queue af bandwidth pct 50 |
| wred dscp |
| # |
| traffic behavior af-2 |
| car cir 1024 cbs 65000 ebs 0 green pass red discard yellow pass |
| # |
| qos policy qos_outbound |
| classifier af-2 behavior af-2 |
| classifier af-1 behavior af-1 |
| # |
| nqa entry admin test |
| type icmp-echo |
| destination ip 99.64.232.5 |
| frequency 100 |
| reaction 1 checked-element probe-fail threshold-type consecutive 5 action-type trigger-only |
| # |
| nqa schedule admin test start-time now lifetime forever |
| # |
| controller Cellular0/0 |
| # |
| interface Aux0 |
| # |
| interface NULL0 |
| # |
| interface LoopBack0 |
| # |
| interface Vlan-interface100 |
| description shengchan |
| ip address 99.74.115.28 255.255.255.240 |
| vrrp version 2 |
| vrrp vrid 100 virtual-ip 99.74.115.30 |
| vrrp vrid 100 priority 120 |
| vrrp vrid 100 preempt-mode delay 5 |
| vrrp vrid 100 track 1 reduced 50 |
| # |
| interface GigabitEthernet0/0 |
| port link-mode route |
| description TO-SR6608 |
| duplex full |
| speed 100 |
| ip address 99.64.232.6 255.255.255.252 |
| qos apply policy qos_outbound outbound |
| packet-filter 3000 inbound |
| # |
| rip 100 |
| undo summary |
| version 2 |
| network 99.0.0.0 |
| silent-interface Vlan-interface100 |
| # |
| interface GigabitEthernet0/1 |
| port link-mode route |
| # |
| interface GigabitEthernet0/2 |
| port link-mode route |
| # |
| interface GigabitEthernet0/27 |
| port link-mode route |
| # |
| interface GigabitEthernet0/3 |
| port link-mode bridge |
| port link-type trunk |
| undo port trunk permit vlan 1 |
| port trunk permit vlan 100 |
| # |
| interface GigabitEthernet0/4 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/5 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/6 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/7 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/8 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/9 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/10 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/11 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/12 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/13 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/14 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/15 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/16 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/17 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/18 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/19 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/20 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/99 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/22 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/23 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/24 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/25 |
| port link-mode bridge |
| port access vlan 100 |
| # |
| interface GigabitEthernet0/26 |
| port link-mode bridge |
| # |
| scheduler logfile size 16 |
| # |
| line class aux |
| user-role network-admin |
| # |
| line class tty |
| user-role network-operator |
| # |
| line class vty |
| user-role network-operator |
| # |
| line aux 0 |
| user-role network-admin |
| # |
| line vty 0 63 |
| authentication-mode scheme |
| user-role network-operator |
| # |
| ip route-static 99.0.0.0 8 99.64.232.5 |
| ip route-static 99.229.0.0 16 99.64.232.5 |
| ip route-static 99.230.0.0 16 99.64.232.5 |
| ip route-static 99.0.0.0 12 99.64.232.5 |
| ip route-static 99.64.0.0 16 99.64.232.5 |
| ip route-static 22.0.0.0 8 99.64.232.5 |
| # |
| snmp-agent trap enable |
| snmp-agent local-engineid 800063A2033CE5A6CDE42C |
| snmp-agent community read psbcread |
| snmp-agent sys-info version all |
| snmp-agent target-host trap address udp-domain 99.64.60.1 udp-port 5000 params securityname psbcread |
| # |
| acl number 3000 |
| rule 0 deny tcp source-port eq 4444 destination-port eq 4444 |
| rule 5 deny tcp source-port eq 135 destination-port eq 135 |
| rule 10 deny udp source-port eq 135 destination-port eq 135 |
| rule 15 deny tcp source-port eq 139 destination-port eq 139 |
| rule 20 deny tcp source-port eq 445 destination-port eq 445 |
| rule 25 deny udp source-port eq 445 destination-port eq 445 |
| rule 30 deny udp source-port eq 593 destination-port eq 593 |
| rule 35 deny tcp source-port eq 593 destination-port eq 593 |
| rule 40 deny udp source-port eq 1434 destination-port eq 1434 |
| rule 45 deny tcp source-port eq 5554 destination-port eq 5554 |
| rule 50 deny tcp source-port eq 9995 destination-port eq 9995 |
| rule 55 deny tcp source-port eq 9996 destination-port eq 9996 |
| rule 60 permit ip |
| rule 65 deny udp source-port eq netbios-ssn destination-port eq netbios-ssn |
| # |
| acl number 3001 |
| rule 0 permit ip destination 99.0.0.0 0.15.255.255 |
| rule 10 permit ip destination 99.229.0.0 0.0.255.255 |
| rule 20 permit ip destination 99.230.0.0 0.0.255.255 |
| rule 30 permit ip destination 99.64.0.0 0.0.255.255 |
| rule 35 permit ip destination 100.224.0.0 0.31.255.255 |
| # |
| acl number 3002 |
| rule 0 permit ip destination 99.64.56.0 0.0.0.255 |
| # |
| domain system |
| # |
| aaa session-limit ftp 32 |
| aaa session-limit telnet 32 |
| aaa session-limit http 32 |
| aaa session-limit ssh 32 |
| aaa session-limit https 32 |
| domain default enable system |
| # |
| user-group system |
| # |
| local-user admin class manage |
| password simple ADMIN123 |
| service-type telnet |
| authorization-attribute user-role level-15 |
| authorization-attribute user-role network-operator |
| # |
| track 1 nqa entry admin test reaction 1 |
ge0/0 为WAN
0/3为VRRP
请问RIP起了什么作用。可以删除不
(0)
最佳答案
rip是动态路由协议,配置在上面是为了学习路由的,应该是有用的
rip配置可以看一下这个链接
http://www.h3c.com/cn/d_201909/1224908_30005_0.htm#_Toc18335020
(0)
关闭会怎么样? 我闭门造车半天了 觉得关闭也没啥影响!
关闭会怎么样? 我闭门造车半天了 觉得关闭也没啥影响!
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
关闭了就可能学不到路由了,网络就可能不通了