问

F1000-T200 通过CONSOLE口，不小心格式化了，就启动不起来了。现在怎么办？

2023-06-07提问

0关注
0收藏，400浏览

zhiliao_y8aQG

zhiliao_y8aQG 零段

粉丝：0人关注：0人

问题描述：

开机后，就一直提示这个。。

**************************************************************************** * * * H3C SecPath BootWare, Version 3.02 * * * **************************************************************************** Copyright (c) 2004-2021 New H3C Technologies Co., Ltd. Compiled Date : Feb 9 2021 Memory Type : DDR3 SDRAM Memory Size : 2048MB Memory Speed : 667MHz Flash Size : 16MB Nandflash Size : 512MB PCB Version : Ver.A BootWare Validating... Image program does not exist. Password recovery capability is enabled. Note: The current operating device is flash Enter < Storage Device Operation > to select device. ==========================<EXTENDED-BOOTWARE MENU>========================== |<1> Boot System | |<2> Enter Serial SubMenu | |<3> Enter Ethernet SubMenu | |<4> File Control | |<5> Restore to Factory Default Configuration | |<6> Skip Current System Configuration | |<7> BootWare Operation Menu | |<8> Skip Authentication for Console Login | |<9> Storage Device Operation | |<0> Reboot | ============================================================================ Ctrl+Z: Access EXTENDED ASSISTANT MENU Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9):

组网及组网描述：

最佳答案

zhiliao_y8aQG

zhiliao_y8aQG 知了小白

粉丝：0人关注：0人

==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 7

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 2
Will you restore the Basic BootWare? [Y/N]Y
Begin to restore Normal Basic BootWare............Done.
Will you restore the Extended BootWare? [Y/N]Y
Begin to restore Normal Extended BootWare...........Done.

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):